Prevent Mold Growth on
Double-Hung Windows in Twin Cities, MN

Keep Your Twin Cities Windows
Crystal Clear And Mold-Free

Mold on your double-hung windows in Twin Cities, MN is a problem. Moldy windowsills are an eyesore and detrimental to your health. At Zen Windows Twin Cities, we’ve seen it all. Here’s how to prevent mold, clean mold from your windowsills, and reduce its chances of returning.

Why Does Mold Form On Double-Hung Windows in Twin Cities, MN?

Mold typically forms on windowsills when condensation and moisture collect around the window. The moisture that produces mold can come from a variety of sources:

Plumbing leaks
Humid outdoor air
Steam from hot showers or cooking
Condensation during the winter, when the warm indoor air meets the cool window glass

Green mold is pretty common in homes and is relatively easy to remove.

Black mold is rarer but more hazardous to your health. Black mold should be assessed and removed by a professional.

How To Get Rid Of Green Mold On Your Windows

Here’s how to remove green mold from the sills of your double-hung windows:

In a bucket, mix three parts warm water with one part bleach.
Lay down a tarp or mat beneath the window. This will catch any mold that falls, preventing it from getting onto your floors. (This is especially important if the floor is carpeted.)
Wear gloves, goggles, and a dust mask. You don’t want to come into contact with any airborne mold spores once you start cleaning your double-hung windows.
Open the window to allow for ventilation. You want the mold spores to flow outdoors.
With a nonabrasive brush (such as a toothbrush), scrub the mold from the windowsill. Dip the brush into the bleach mixture often.
Use a clean cloth or rag to wipe away the loosened mold.
Let the windowsill dry before you close the window.

By following these steps and taking necessary precautions, you can effectively eliminate green mold from your windowsills and prevent its return.

Remember to wear protective gear, ensure proper ventilation, and thoroughly clean the area to avoid spreading mold spores. For persistent mold issues or large areas of contamination, consider contacting a professional mold remediation service.

Preventing Mold From Forming On Your Windows

There are a few ways to help reduce the chances of mold growth on your double-hung windowsills.

Remove Condensation Regularly: Wipe condensation and any moisture from your windows regularly. No moisture means there’s no way for mold to grow.
Invest In New Windows: If your windows are old, they may be leaking or producing excess condensation. This produces mold and creates other problems.

If your windows are inefficient, you’re spending more than necessary on your energy bills. Heat transfer through your windows forces you to use your HVAC system more than you should.

Proper Ventilation: Exhaust fans in your bathroom and kitchen greatly reduce excess humidity while increasing airflow.
Dehumidifier: For damp areas, install a dehumidifier. This will collect extra moisture from the air, reducing the conditions that encourage mold growth.

Regularly inspecting your windows for signs of moisture or mold and addressing any issues promptly will help maintain a healthier, mold-free home.

Investing In New Double-Hung Windows To Prevent Mold

Investing in new windows to prevent mold might seem drastic. But the truth is that if your current windows are producing mold, they’re already causing other problems.

In addition to higher utility bills, your current windows probably don’t operate as well as they used to and are likely reducing the curb appeal and value of your home.

Fortunately, the best double-hung windows in the Twin Cities don’t cost an arm and a leg. With our genuinely lower prices and excellent financing, we make getting superior windows easily within reach.

Our lines of vinyl double-hung window are independently rated as some of the most energy-efficient, airtight, condensation-resistant, and leak-proof on the market.

When you see all the features of our windows, it’s easy to see why:

Ultra-smart triple-fin weather stripping
DuraSill’s double-walled sill dam
Soft-seal straddle gasket
High-density comfort foam

Our vinyl double-hung windows have been shown to be 23 times more airtight than wood double-hung windows from big-name manufacturers like Pella and Marvin.

They’re also 15 times more airtight than vinyl double-hung windows from brands like Alside and Champion.

Get An Online Quote For Double-Hung Windows

If you’d like to know more about prices for window replacements in Minneapolis–St. Paul, contact Zen Windows Twin Cities and get a free online quote from us today. We’ll email you a firm and accurate price on superior double-hung windows within one business day.

Once you have the quote, we won’t pressure you or pester you with incessant follow-up. Take as much time as you need to make a decision. We’ll be here if you have any questions.

Thank you!

Steve Copsey

Owner